14. What is a UP120?
A 120cc compressor with lug mountings and is available in a variety of A and B section and polygroove clutches in both 12 and 24 volt.
15. What is the lug spacing on a UP120?
73mm, which makes this compressor interchangeable with a variety of compressors.
16. What is unique about the UP120?
It is the only 10 cylinder swashplate compressor in this capacity available today. It has an extremely quiet and smooth operation and delivers high relative output through all rev ranges. Also the low side service valve can be placed in two positions on the compressor. The compressor operates in either clockwise or counter clockwise directions.
17. Which is the most popular UP120?
The UP120-1415, which has a AA section clutch and is readily interchangeable with a variety of aftermarket compressors including the popular Sanden SD507 and Diesel Kiki TM13.
18. In which applications is the UP115 mostly fitted?
It is fitted to a wide variety of aftermarket systems with a lug type mount and drive bracket. It is also fitted as a replacement compressor for any application where the popular 73mm lug spacing for mounting is used.
19. Can the UP120 be adapted to fit imported vehicles?
Yes, many imported vehicles have compressors that are no longer available or a very expensive to replace. The UP120 combined with a simple change to the hoses and the mounting bracket is easily fitted to many of these applications.
20. Does the UP120 have flare or o-ring ports?
The UP120 , like all the A Group models is available in a choice of ports. This is achieved by the interchangeability of the rear caps between all the A Group models and these caps are available with NO.8 and NO.10 flare or o-ring.
21. Does the UP120 have horizontal or vertical ports?
The option of horizontal or vertical ports on the rear caps is readily available.
22. Does the UP120 have pad or flange type ports?
The option of flange type ports is available with special orders.
23. Does the UP120 have low and high side service valves?
Yes, most UP120 models have both service valves fitted as standard.
24. What is a UX120?
A direct mount rather than a lug mount version of the UP120. All the features available on the UP120 are also available on the UX120 and both have the same range of clutches available. The compressor operates in either clockwise or counter clockwise directions. The direct or `bolt through' mounting points on the UX120 are spaced 78 mm apart in length and 128 mm in height.