Unicla International Limited
UP120 - lug mount type
 |
• Heavy duty clutch • Universal mounting • Horizontal or Vertical oring hose ports • R134a service valves • High pressure relief valve ( optional) • Dust cover (optional) • Single piece body • Oil return port (optional) • PAG or POE Oil |
List of Models
|
MODEL NUMBER |
REAR CAP |
CLUTCH |
FIELD COIL |
SEAL KIT |
GASKET SET |
||
|
UP120 |
Description |
Part no. |
Description |
Part no. |
Part no. |
Part no. |
Part no. |
|
UP120-1290 |
Vertical oring 3/4 X 7/8 |
CH150-VOR |
135mm B 12Volt |
CL109B -135 |
FC109L |
SK150 |
GS150 |
|
UP120-1924 |
Vertical oring 3/4 X 7/8 |
CH150-VOR |
132mm AA 12Volt |
CL109-132 |
FC109L |
SK150 |
GS150 |
|
UP120-1926 |
Vertical oring 3/4 X 7/8 |
CH150-VOR |
132mm AA 24Volt |
CL109-132-24v |
FC109-24L |
SK150 |
GS150 |
|
UP120-2450 |
Vertical oring 3/4 X 7/8 |
CH150-VOR |
N/A |
N/A |
N/A |
SK150 |
GS150 |
|
UP120-2490 |
Vertical oring 3/4 X 7/8 |
CH150-VOR |
135mm B 24Volt |
CL109B -135-24v |
FC109-24L |
SK150 |
GS150 |
|
UP120-4251 |
Horizontal oring 3/4 X 7/8 |
CH150-HOR |
N/A |
N/A |
N/A |
SK150 |
GS150 |
|
UP120-6850 |
Vertical oring 3/4 X 7/8 |
CH150-VOR |
125mm 10PG 12Volt |
CL109R2 |
FC109S |
SK150 |
GS150 |
|
UP120-6851 |
Vertical oring 3/4 X 7/8 |
CH150-VOR |
119mm 8PG 12Volt |
CL109R7 |
FC109L |
SK150 |
GS150 |
|
UP120-6855 |
Horizontal oring 3/4 X 7/8 |
CH150-HOR |
119mm 8PG 12Volt |
CL109R7 |
FC109L |
SK150 |
GS150 |
|
UP120-6856 |
Horizontal oring 3/4 X 7/8 |
CH150-HOR |
119mm 6PG 12Volt |
CL109R3 |
FC109L |
SK150 |
GS150 |
|
UP120-6866 |
Vertical oring 3/4 X 7/8 |
CH150-VOR |
119mm 6PG 12Volt |
CL109R3 |
FC109L |
SK150 |
GS150 |
Clutches
A diverse range of clutches are available in AA, B section and Polygroove. Also 12 and 24 volt with metal dust covers. The featured compressor here is the UP120-1924 with AA,12 volt clutch and vertical oring ports.
|
Clutch Chart of various models available |
|||||||||||||
|
|
Pulley Diameter (mm) |
Voltage |
|||||||||||
|
Type |
119 |
120 |
125 |
130 |
132 |
133 |
135 |
137 |
140 |
141 |
145 |
12V |
24V |
|
A Groove |
|
|
x |
|
|
|
x |
|
|
|
x |
x |
x |
|
AA Groove |
|
|
x |
|
x |
|
x |
|
|
|
x |
x |
x |
|
B Groove |
|
|
|
|
|
|
x |
x |
|
|
|
|
x |
|
BB Groove |
|
|
|
x |
|
|
x |
|
x |
|
|
x |
|
|
4-Groove |
|
|
x |
|
|
|
x |
|
x |
x |
|
x |
|
|
5-Groove |
x |
|
|
|
|
|
x |
|
|
|
x |
x |
|
|
6-Groove |
|
x |
x |
|
|
x |
x |
|
x |
|
|
x |
|
|
8 Groove |
x |
|
|
|
|
|
|
|
|
|
|
x |
x |
|
10-Groove |
|
|
x |
|
|
|
|
|
|
|
|
x |
x |
Mounting
The UP120 compressors are suited to all mounting brackets made for compressors with 73mm lug spacing, and can be interchanged with numerous compressors in various applications available in the market today.
Note; refer to Unicla Compressor Clutch Section on this website for complete guide to mounting alignment of all clutches available for UP120 compressors
Hose Ports
Vertical or horizontal oring ports are available, and for special applications Unicla has pad or flange type configurations as an option.
Hose port configurations for UP120 compressors are determined by the type of rear cap fitted to the compressor as follows;
|
Rear Cap Type |
Description |
|
U02 |
Vertical oring fittings - ¾ discharge and 7/8 suction with service valves mounted low |
|
U03 |
Vertical oring fittings - ¾ discharge and 7/8 suction with service valves mounted high |
|
D02 |
Horizontal oring fittings - ¾ discharge and 7/8 suction with service valves mounted high |
|
FN2 |
Special Unicla flange – horizontal configuration for suction and discharge on one fitting |
|
FN6 |
Special Unicla flange – vertical configuration for suction and discharge on one fitting |
|
FN8 |
Special Unicla flange – horizontal GM type horizontal configuration |
Service Valves
Low and high side service valves are fitted as standard on all Unicla UP120 compressors and can be easily removed if not required. The low side service valve can be placed in two positions on the compressor, either on the rear cap or the top of the compressor.
Oil Return Port
A Unicla Oil Return Port is standard on the UPF120, and is available as an option on all UP/UX120 models. It screws easily into place of the top oil filler plug or the low side service port. Unicla part no. 42203-000160 and is suited to the Unicla Oil Separator part no.OS000010.
