48. What is a UP200?
A 200cc heavy duty compressor with lug mountings and is available in a variety of A and B and polygroove section clutches in both 12 and 24 volt.
49. What is the lug spacing on a UP200?
80mm, which makes this compressor easily mounted in a variety of heavy duty applications.
50. Which is the most popular UP200?
The two most popular UP200 models are the UP200-4205 which has a AA section 24 volt clutch and the UP200-5175 which has a B section 24 volt clutch. Both these compressors are widely used in heavy duty applications particularly in twin systems for small mini bus vehicles.
51. What is unique about the UP200?
It is the only 200cc, 10 cylinder swashplate compressor available in the world today. Many larger capacity and twin airconditioning systems demand the output the UP200 can provide and until the UP200 was released, the designers of these systems were forced to use a compressor that was either too small or too large. The UP200 has solved this `gap' in compressor sizing and is available in an excellent price range. The compressor operates in either clockwise or counter clockwise directions.
52. In which applications is the UP200 mostly fitted?
Mostly fitted in mini bus, military, truck and tractor applications.It has become an ideal choice for designers of airconditioning systems that require the output available from the UP200.
53. Does the UP200 have flare or o-ring ports?
Yes, the UP200 is available with flare or o-ring ports. The rear cap of the compressor, which houses the ports is easily changed and can be swapped from one UP200 to another.
54. Does the UP200 have horizontal or vertical ports?
The option of horizontal or vertical ports on the rear caps is readily available.
55. Does the UP200 have pad or flange type ports?
Flange type ports are not available as standard. However, these parts would be available upon special order request.
56. Does the UP200 have low and high side service valves?
Yes, most UP200 models have both service valves fitted as standard.
57. Is there an oil return port available for the UP200?
Yes, an oil return port is a standard feature of the UP200 and its position can be interchanged with the low side service valve.
58. What is a UX200?
A direct mount rather than a lug mount version of the UP200. All the features available on the UP200 are also available on the UX200 and both have the same range of clutches available. The compressor operates in either clockwise or counter clockwise directions. The direct or `bolt through' mounting points on the UX200 are spaced 94mm apart in length and 138mm in height.