Unicla International Limited
UX200 - lug mount type
 |
• Heavy duty clutch • Interchangeable rear cap • Horizontal or Vertical oring hose ports • R134a service valves • High pressure relief valve (optional) • Single piece body • Oil return port (optional) • PAG or POE Oil |
List of Models
|
MODEL NUMBER |
REAR CAP |
CLUTCH |
FIELD COIL |
SEAL KIT |
GASKET SET |
||
|
UX200 |
Description |
Part no. |
Description |
Part no. |
Part no. |
Part no. |
Part no. |
|
UX200 -3212 |
Vertical oring 3/4 X 7/8 |
CH112-VOR |
145mm BB 12Volt |
CL112BB |
FC112-12V |
SK112 |
GS200 |
|
UX200-3225 |
Vertical oring 3/4 X 7/8 |
CH112-VOR |
145mm 14BB 24Volt |
CL112-24V |
FC112-24V |
SK112 |
GS200 |
|
UX200-3250 |
Vertical oring 3/4 X 7/8 |
CH112-VOR |
N/A |
N/A |
N/A |
SK112 |
GS200 |
|
UX200-4200 |
Vertical oring 3/4 X 7/8 |
CH112-VOR |
145mm B 12 Volt |
CL112B-12V |
FC112-12V |
SK112 |
GS200 |
|
UX200-4205 |
Vertical oring 3/4 X 7/8 |
CH112-VOR |
145mm AA 24Volt |
CL112A-24V |
FC112-24V |
SK112 |
GS200 |
|
UX200-4215 |
Vertical oring 3/4 X 7/8 |
CH112-VOR |
145mm B 24Volt |
CL112B-24V |
FC112-24V |
SK112 |
GS200 |
|
UX200-4225 |
Horizontal oring 3/4 X 7/8 |
CH112-HOR |
145mm AA 24Volt |
CL112A-24V |
FC112-24V |
SK112 |
GS200 |
|
UX200-4226 |
Horizontal oring 3/4 X 7/8 |
CH112-HOR |
145mm AA 12Volt |
CL112A-12V |
FC112-12V |
SK112 |
GS200 |
|
UX200-4235 |
Horizontal oring 3/4 X 7/8 |
CH112-HOR |
145mm B 24Volt |
CL112B-24V |
FC112-24V |
SK112 |
GS200 |
|
UX200-4675 |
Vertical oring 3/4 X 7/8 |
CH112-VOR |
145mm AA 12 Volt |
CL112A-12V |
FC112-12V |
SK112 |
GS200 |
|
UX200-5625 |
Vertical oring 3/4 X 7/8 |
CH112-VOR |
125mm 6PG 12Volt |
CL112-6PG |
FC112-12V |
SK112 |
GS200 |
|
UX200-5635 |
Vertical oring 3/4 X 7/8 |
CH112-VOR |
125mm 10PG 12 Volt |
CL112-10PG |
FC112-12V |
SK112 |
GS200 |
|
UX200-5636 |
Vertical oring 3/4 X 7/8 |
CH112-VOR |
125mm 10PG 24Volt |
CL112-10PG-24V |
FC112-24V |
SK112 |
GS200 |
Clutches
A diverse range of clutches are available in AA, B section and Polygroove. Also 12 and 24 volt.
|
Clutches available |
||||||||
|
|
Size (mm) |
Power |
||||||
|
Type |
125 |
135 |
145 |
152 |
168 |
178 |
12V |
24V |
|
UP/UX200 |
||||||||
|
AA Groove |
|
|
x |
x |
|
|
x |
x |
|
B Groove |
|
|
x |
|
|
|
x |
x |
|
BB Groove |
|
|
x |
x |
|
|
x |
x |
|
6-Groove |
x |
|
|
|
|
|
x |
x |
|
6 & 8 Groove |
|
x |
|
|
|
|
x |
x |
Mounting
The UX200 is suited to mounting brackets made for compressors with 80 mm lug spacing. The layout and design of the mounting lugs make the UX200 easy to fit to most popular engines.
UX200 with horizontal oring hose ports ( side and rear view)
Note; refer to Unicla Compressor Clutch Section on this website for complete guide to mounting alignment of all clutches available for UX200 compressors
Hose Ports
Vertical or horizontal oring ports are available.
Hose port configurations for UX200 compressors are determined by the type of rear cap fitted to the compressor as follows;
|
Rear Cap Type |
Description |
|
U |
Vertical oring fittings - discharge and 7/8 suction with service valves mounted low |
|
DD |
Horizontal oring fittings - discharge and 7/8 suction with service valves mounted high |
Service Valves
Low and high side service valves are fitted as standard on all Unicla UX200 compressors and can be easily removed if not required. The low side service valve can be placed in two positions on the compressor, either on the rear cap or the top of the compressor.
Oil Return Port
A Unicla oil return port is fitted standard on all UX200 compressors. Unicla oil return port fitting part number 42203-000160 screws easily into this position at the top of the compressor or can be interchange with the low side service fitting on the rear cap. The fitting has a 7/16 UNF male flare and is suitable for use with Unicla Oil Separator part no.OS000010.
